INTENDED USE
The Multi-functional Monitoring Meter is used in conjunction with blood glucose test strips, blood uric acid test strips, blood lactate test strips, blood β-ketone test strips, and total cholesterol test strips. The concentration of glucose, uric acid, lactate, β-ketone and total cholesterol can be measured in fresh fingertip capillary whole blood and venous whole blood.
The test results of the meter should only be used for in vitro diagnostic monitoring and should not be used as a sole basis for disease diagnosis. Please consult with your treating physician and specialists, and refrain from making decisions contrary to their instructions solely based on the test results. This product is for professional use only.
The meter can be used for adults, but not for neonatal testing.
Features
7-in-1 multi-function meter for accurate readings of glucose, lactate, beta-ketonemia, uric acid, total cholesterol, (calculated items hematocrit and hemoglobin).
7 gold electrode technology guarantees excellent anti-interference performance.
Smartphone app provides intelligent patient data management.
Wireless transmission provides real-time data updates.
With its wide HCT range, it can accommodate a wide range of samples.
User-friendly design with audible test results.
One-touch ejection of test strips to avoid cross contamination.
Dimensions 66 mm × 119 mm × 20 mm (± 5 mm)
Memory capacity, 7000 sets
Device life 5 years.
Rechargeable lithium battery
Auto strip ejection
Perform A Test
As an example, the steps for testing blood glucose using test strips are described:
|
Icon |
Action |
|
|
Step 1: Take a test strip from the tube and immediately close the lid of the tube. |
|
EN600 and EN601, EN602 and EN603 |
Step 2: Press the side button of the meter for 3 s to turn it on. From the main interface of the meter, select the blood glucose icon. |
|
|
Step 3: The screen should display "Insert GLU Test Strip" and the calibration code message. At this point, please cross-check the calibration code message with the code from the test strip box for confirmation. If the information does not match, or if the screen displays "Insert the Code Chip", please refer to the "Code Chip Calibration Section". |
|
|
Step 4: Insert the test strip with the logo side facing up into the meter's test strip slot and push the test strip to the end, at which point the front LED indicator light should turn blue. |
|
|
Step 5: Prick your finger with a blood collection lancet or blood sampler gently and squeeze to obtain a small drop of blood. Wipe away the first drop and use the second drop for testing. |
|
|
Step 6: Touch the bottom side of the test strip with the drop of blood from your finger. The blood sample will be automatically drawn in. Please make sure that the blood sample fills the entire reaction zone of the test strip. |
|
|
Step 7: The test interface switches to the countdown mode, the meter starts to test, and finally displays the test results on the LCD screen, with the labeling options appearing below the measurement results. You can select "Fasting" (FPG), "Before Meal"(Ac), "After Meal"(pc.), "Before Bedtime" (hs.) to add markers to your blood glucose result using the touch screen. Finally, the test strip can be removed and discarded by pressing the eject button. |
Uric acid/lactate/β-ketone/total cholesterol cannot be labeled with "Fasting" (FPG), "Before Meal"(Ac), "After Meal"(pc.), "Before Bedtime" (hs.) "The rest of the test procedure is the same as for blood glucose.
Storage Conditions
●Transportation and storage environment: ambient temperature: 4-30℃, relative humidity: 10-85%.
●Unopened test strips should be stored in a dry place away from light and direct sunlight and should not be frozen in the refrigerator.
●Storage environment of test strips after opening: ambient temperature: 4-30℃, relative humidity: 10-85%. The test strip container should be tightly sealed after taking out the test strips to avoid moisture exposure.
●Improper storage of the test strips can negatively affect the accuracy of the test results.
Expiration Date
●Please check the label for production and expiration date.
●Unopened test strips are valid for 24 months (Glucose Strips), Unopened test strips are valid for 18 months (Uric Acid, Ketone, Lactate, Total Cholesterol Strips),
●Expiration date after opening: 3 months (not exceeding the expiration date on the test strip container). Please mark the opening date in time. Do not use test strips that have passed the expiration date.
●Control solutions can be stored at 4-30°C for 12 months. They are valid for 3 months after opening.
Hot Tags: multi blood glucose meter, China multi blood glucose meter manufacturers, suppliers, factory, CGM Meter, glucose meter other home use test
